HURCO TM10i CNC LATHE WITH 12' LNS MAGAZINE BAR FEEDER, NEW 2013

Standard Turret
Distance between centers 27.4” 695.0 mm
Swing over bed Æ22.9” Æ582.0 mm
Swing over cross slide Æ15.8” Æ402.0 mm
Maximum Turning Diameter Æ17.7” Æ450.0 mm
Maximum Turning length 28.4” 720.0 mm

Type Cartridge, A2-8
Speeds 0-3000 rpm
Bearings ABEC Class 7 angular contact
Bearing Lubrication Grease packed
Spindle Motor Servo-Frequency, Single wound, Fan cooled
Spindle Drive 200VAC, 3 Phase, 50/60 Hz, Regenerative Braking
Spindle Nose A2-8
Spindle Bore Diameter Ø3.62” (Ø92mm)
Draw Tube Diameter Ø3.07 (Ø78.0 mm)
Spindle HP-Peak (1 min. Rating) 29.7 HP (22kW) @ 600 RPM
-Continuous 20.0 HP (15 kW) @ 600 RPM
Spindle Torque-Peak (1 min. Rating) 260 lb-ft (352 Nm)
-Continuous 176 lb-ft (239 Nm)
Drive Belt Ratio 1.67:1
Belt Type 7M(3R+3R+3R), Poly V
Maximum Speed 3000 rpm
Spindle Acceleration Time 0-3000 rpm in 4.0 seconds
Spindle Decelerate Time 3000-0 rpm in 5.0 seconds
Spindle Orientation External, belt drive encoder
Spindle Configuration Cartridge-type, flange mounted

Chuck Size 10” 254 mm
Through Hole Ø3.07” Ø78mm
Jaw Stroke .346” 8.8mm
Max Gripping Force 24,250lbf 11,000kgf
Max RPM 3200 3200

Collet Size 193E

Standard Turret
30 degree incline (X) axis 9.8” 250.0 mm
Horizontal (Z) axis 29.5” 750.0 mm

Standard Turret
Turret Type Slotted Disc
Number of Tool Stations 12
Maximum Boring Bar Diameter Ø1.5” Ø40mm
Tool Shank 1.0”x 1.0” 25mm x 25mm
Rotation Bi-directional
Indexing Repeatability +/-1”
Tool to tool index time (adjacent) .5 seconds
Tool to tool index time (furthest) 1.5 seconds
Turret Positioning .0004” .005 mm
Boring Block Alignment .0008” . 02 mm
Lubrication
Type Positive displacement by electric pump
Lubrication Type See Attachment `D’
Lubrication Volume 2 liter reservoir with float switch to maintain liquid level. Tank
should last 80 hours before refilling.
Lubrication pump 115 VAC, single phase, electric pump with maximum
discharge of 3 cc/cycle - 4 cycles per hour
Maximum pump pressure 42 PSI ( 2.9 bar)

Hydraulic
Type Piston Type, 2HP
Hydraulic Tank Capacity 18.5gal 70L
Hydraulic Pump P16FRA0
Max Pump Pressure 569psi 39.2bar

Coolant Tank Capacity 15.9 gallons 60 liters
Flood Pump Rating 11 gallons/minute 41 liters/minute
Flood Pump Size 0.25 HP 0.18 kW (60Hz)

KVA Rating 27.2
Voltage Required 200-240 VAC / 60 Hz
Air Requirements 5 CFM @ 80-100 psi 0.14 M3/min. @ 6-8 bar