6" LUCAS MODEL 40T 1210 PRECISION TABLE TYPE 5-AXIS CNC

an Allen Bradley 7320B CNC
control. Machine to be wired 460/volts, 3 phase, 60 hertz.
GENERAL SPECIFICATIONS:

Spindle diameter 6"
Spindle taper with Lucas power tool lock
and ejector to facilitate rapid tool change #50
Spindle longitudinal travel 48"
Head vertical travel on flame hardened and
ground column ways 120"
Table dimensions with 4-cross slots 60" x 158"
Table cross travel 144"
Table moves on 360" flame hardened and ground top surfaces and guiding
edges of the saddle. Underways table lined with non-metallic inserts.
Table weight capacity 60,000 lbs
"Air Assits" feature incorporated.
Saddle Longitudinal travel 72"
Saddle moves on flame hardened and ground top surfaces and guiding
edges of the bed. Underways of saddle lined with non-metallic inserts.
"Air Assits" feature incorporated.
Width across outer support ways 294"
Spindle speed range (D.C. Drive) 5.6 1120 RPM
Feed range to all axes .005 - 100 IPM
Rapid traverse rate (x and y axis) 200 IPM
Rapid traverse rate (z and w axis) 150 IPM
Spindle drive H.P. 50 H.P.
Weight approximately 85,500 lbs

MOTOR SPECIFICATIONS

50 HP DC main spindle drive motor

Allen Bradley 7320B CNC Control
5 Axis rotary table 60" x 60" full contouring
Five cross slots on table
12" additional saddle (w-axis) travel
Extended Program Storage (Memory) includes edit, and tape punch
capabilities 1000 feet
Air conditioning for 125 degrees F rating
Remote axis switchable readout, (position and distance to go)
60 hours of computer power failsafe memory battery backup for use with
1000ft. additional memory
RS-232C Serial load plug connector for tape punch in lieu of the
standard RS-408 plug connector.
NOTE This machine was in operation in an aerospace subcontractor.
The machine is reported to be in excellent condition holding +-.001 linea
r
and geometric alignments are within +-.002 over the entire range.
WAS $195,000.00