TRAUB MODEL TNS-26-DGY CNC TURNING CENTER WITH SUB SPINDLE,

Main spindle
Spindle capacity (max. bar dia.) 26mm (1.02")
Turning length per turret 270mm (10.63")
Spindle speed max. 7000 RPM
AC motor, infinitely variable speed Power rating 11kw (15 HP)
Max. torque Nm (ft lb) 105 (50)
Constant power rating 1:7
Spindle nose register dia. 90mm (3.543")
Counter Spindle:
AC motor, infinitely variable speed
Power rating 5.5kw (7.5 HP)
Max. torque 35Nm (17'Lb)
Constant power rating 1:4
Spindle nose register dia. 85mm (3.346")
Turrets
Number of turrets 2
Tool bores
for cyl. shanks to DIN 69880 12 each
Nominal dia. x-length 25x48mm
(.984x1.890")
Cutting tool shank
section to DIN 69880 16x16mm(.630x.630")
Average chip-to-chip-time 1.17 Sec.
Indexing time 1st position 0.4 Sec.
each additional position 0.12 Sec.
Drive for rotating turret tools
Number of driven tools 2 x 12
Power rating (15% duty cycle) 2.6kW (3.5 HP)
Max. torque (15% duty cycle) 4Nm (1.9' Lb.)
Max. spindle speed 8000 RPM
Feed drives
X-axes (S1+S2)
Rapid traverse and feed rate 12mm (472" Min)
Feed thrust 3000N (600 Lb)
Feed traverses 80mm (3.150")
Z-axes (S1+S2)
GENERAL SPECIFICATIONS (Con't):
Rapid traverse and feed rate 15mm (590" Min.)
Feed thrust 5000N (1000")
Feed traverses 270mm (10.630")
Y-axes (TNC 30 DGY)
Rapid traverse and feed rate 7.5mm (295" Min.)
Feed thrust 5000N (1000 Lbs)
Feed traverses 330mm (12.992")
C-axes Option
Machine Dimensions
Length x depth 2432x1890mm
(95.7x74.4")
Height 1850mm (72.8")
Weight 3540Kg (7800lbs)
(with counter spindle and switchgear cabinet)
Total installed power rating 35kW (47lbs)
Misc. Live Tool Holders & Tooling