30" SWECO MODEL M30 SCREEN SEPARATOR

Separate solids from liquids or segregate dry materisal into
various sizes. Particles as fine as 400 mesh (37 microns)
can be screened, with up to 4 screen decks incorporated in one
Sweco separator. No special flooring or foundation is needed
and less working floorspace is required. Simple and efficient
design requires less horsepower. Other features include long
screen life and ease with which screens may be changed.
The Sweco Separator is a vibratory screening device that vibrates
about its center of mass. Bivrations is accomplished by eccentric
weights on the upper and lower ends of the motion-generator shaft.
Rotation of the top weight creates vibration in the horizontal
plane, which causes material to move across the screen cloth to
the periphery. The lower weight acts to tilt the machine, causing
vibration in the vertical and tangential planes. The angle of
lead given the lower weight with relation to the upper weight
provides variable control of the spiral screening pattern. Speed
and spiral pattern of material travel over the screen cloth can
be set by the operator for maximum throughput and screening
efficiency of any screenable product...wet or dry...heavy or
light...coarse of fine...hot or cold.

MOTOR SPECIFICATIONS

1/2 HP
230/460 Volt, 3 Phase
1,140 RPM