DAEWOO PUMA MODEL 300MC 3-AXIS CNC LATHE TURNING CENTER WITH C-AXIS AND LIVE TOOLING

Capacity:
Swing over bed 23.2"
Swing over carriage 17.7"
Distance between centers 27.1"
Max. Turning Diameter 14.0"
Main Spindle:
Spindle speed 28-2,800 RPM
Spindle nose ASA-A2-11
Draw tube I.D. 4.05"
Spindle bore diameter 4.53"
AC high torque spindle motor (30 min) 30 HP
Max. Spindle torque 434 ft-lbs
C-Axis:
Minimum programmable angle .001 deg.
Rapid traverse rate 200 RPM
C-Axis repeatability +/- .006 deg.
C-Axis positioning accuracy .0167 deg.
Bed, Saddle, & Cross Slide:
X-Axis travel 9.8"
Z-Axis travel 26.8"
Angle of slant bed 45 deg.
X-Axis guideway span 12.6"
Z-Axis guideway span 15.0"
X-Axis rapid traverse rate 630 IPM
Z-Axis rapid traverse rate 945 IPM
X-Axis ball screw diameter 1.3"
Z-Axis ball screw diameter 1.6"
Maximum X axis feed thrust 3,040 lbs
Maximum Z axis feed thrust 4,480 lbs
X axis repeatability +/- 0.00006"
Z axis repeatability +/- 0.00008"
(Cont.)
Turret:
Number of tools 12
Tool holder type BMT 65
Turning tool shank size 1.0"
Boring bar diameter, Main spindle 1.5"
Turret index time (next station) 0.15 sec.
Tool selection Bi-directional
Turret index repeatability +/.0005 deg.
Tailstock:
Tailstock quill diameter 3.9"
Tailstock quill stroke (programmable) 3.9"
Max. tailstock quill thrust/max. hydraulic pressure 2,680 lbs/580 PSI
Tailstock spindle taper MT #4
Rotating Tools:
Rotating tool 40-4,000 RPM
Rotating tool spindle motor (10 min rating) 7.5 HP
Rotating tool torque (10 min rating) 34.7 ft-lbs
Rotating tool collect type ER 32
Milling collet capacity 1/8" to 3/4"
Coolant System:
Coolant pump pressure 65 PSI
Coolant pump motor 1.2 HP
Coolant tank capacity 40 Gallons
Hydraulic/Lubrication:
Hydraulic tank capacity 3 gal.
Hydraulic oil requirement (or equivalent) Mobidl DTE#24
Way lubrication tank capacity 0.5 gal.
Way lubrication oil requirement (or equivalent) Mobil Vactra #2
Machine dimensions 135" L x 71" W
Machine weight (approx) 13,340 lbs
Machine voltage required 205-235 volt/3 phase
MOTOR SPECIFICATIONS:
30 HP Main Spindle Drive Motor