KASHIFUGI MODEL KGH-300 GEAR HONING MACHINE

GENERAL SPECIFICATIONS:

Maximum diameter with support 12"
Maximum diameter without support 20"
Maximum pitch 4
Minimum pitch 26
Maximum axial feed travel 9-7/8"
Maximum helix angle 45 degrees
Center distance of hone to workpiece4" to 15"
Table top diameter 7-7/8"
Table bore diameter 3-1/8"
Diameter of standard equipment work arbor 1-1/4"
Taper of work arbor adaptor #4 Morse
Maximum hone size diameter 10-1/4"
Maximum hone shift diameter 4"
Diameter of standard equipment hone arbor 3-1/8"
Hone speed 750 RPM
Axial feed 0.300 to 3.9 IPM
Rapid vertical feed 8 IPM
Overall dimensions 70" L x 37" W x 68" High
Approximate weight 6,000 lbs.

MOTOR SPECIFICATIONS

1-1/2 HP Main motor
3 HP Total power
NOTE The Model KGH-300 Gear Honing Machine represents a major advance in t
he art of honing
hard spur and helical gears. To date, gear honing has closely resembled gea
r shaving where the
typical hone is a helical gear meshing with the workpiece at crossed axes.
The KGH-300 uses a
worm-type hone, which meshes with the gear in the same manner as hobbing, an
d has an action that
is similar to the Reishauer method of grinding gear teeth. Worm honing with
the KGH-300 has
several advantages, including (1) speed of 2000 FPM versus 600 FPM; (2) 0.6
um surface finish
versus 4.6 um; (3) shorter honing time; (4) resharpening of hones by the use
r; (5) longer hone life;
and (6) more accurate hones.