16" X 16" HAAS HS-1RP CNC HORIZONTAL MACHINING CENTER

Pallet size 16" x 16"
Max. weight on each pallet 500 lbs.
Pallet change time 25 sec.
Tool changer capacity 24
Tool changer type CT-40
Tool changer pull stud JMTBA Std. 45 deg.
Max. tool dia. 3.5"
Max. tool weight 12 lbs.
Change time (avg):
Tool to tool 8.0 sec.
Chip to chip 10.0 sec.
Indexing speed 25 RPM
Rapid feedrate 710 IPM
Max. cutting feedrate 300 IPM
Spindle motor (max. rating) 15 HP
Axis motors (max. rating) 5.0 HP
(max. thrust rating) 3400 lbs.
Machine weight 16,000 lbs.
Door opening width (sides) 35"
Enclosure material Powder coated 14 GA
Colded roll steel
Window material Polycarbonate
Coolant flow rate 10 GPM
Coolant capacity 40 gal.
Air required (min.) 4 scfm, 100 psi
Power required 400 amps (FLA) 200-
250 VAC 3phase, 14
Kva
Travels:
X 24"
Y 20"
Z 22"
A +/- 8380 deg.
4th Axis:
Drive system Servo
Minimum resolution 1 deg.
Rotational torque 300 ft/lbs.
Brake torque 1000 ft/lb.
Backlash 30 arc-sec.
Indexing accuracy +/- 15 arc-sec.
Repeatability 10 arc-sec.
Motor 5.0 HP
Gear ratio 72:1
Max. weight on platter 500 lbs.
Spindle:
Taper size #40 taper
Speed 0-7500 RPM
Transmission 2-speed geared head
Ratios 1:1.25 High,3.2:1 Low
Max. torque @ RPM 230 ft-lbs @ 500
Bearings ABEC Class 7
Bearing lubrication Grease packed
Cooling Air-cooled
Orientation Air-actuated shot pin